Alpha Series P10
Standard Features
The Alpha S-tube trailer pump was designed to replace mechanical ball pumps widely used to pump 10mm pea gravel mixes. Mechanical ball valve pumps were experiencing difficulties pumping the harsher concrete mixes now being produced. Due to popular demands for a smaller compact high pressure pump, the Alpha has developed into a wide output range from 10 cubic metres per hour to 30 Cubic metres per hour.
General Specifications
| Specifications: | P10 |
| Maximum Output: | 6M3 |
| Maximum Concrete Pressure: | 300 bar |
| Maximum aggregate size: | 10 mm |
| Concrete Cylinder Size: | 75 mm |
| Concrete Cylinder Stroke: | 610 mm |
| Hydraulic Cylinder Size: | 70 mm bore with 40 mm rods |
| Maximum strokes per minute: | 40 |
| Variable Volume Control: | Yes |
| S-tube Casting Size: | 75 x 75 |
| Hydraulic Cylinder Size: | 65 mm bore x 100 mm stroke x 27 mm rod |
| Hydraulic Tank Capacity: | 160 litre with inspection hatch |
| Hopper Capacity: | 200 litre |
| Hopper Height: | 400 mm |
| Hopper Outlet Size: | 75 mm |
| Engine Size: | 51 kW |
| Fuel Tank Capacity | 60 litre with level gauge |
| Axle Capacity: | 3,000 kg torsion bar suspension |
| Wheel: | 195/65R x 14 sport rims. 225/70R x 15 sport rims |
| Brakes: | 300 mm electric (Optional hydraulic over ride) |
| Outriggers: | Manual standard models (Optional hydraulic rear and/or front) |
| Length | 3,500 mm |
| Width | 1,600 mm |
| Height | 1,600 mm |
| Weight: | 1,250 kg |
Transcrete Australia